Xterasys Wireless LAN Card Manual de usuario

802.11g Wireless LAN Card User’s Manual Doc. No.:120903-01

7. Follow the instruction to select the program folder. Click Next to continue. 8. Click Finish to complete the installation - 6 -

- 7 - Install the device1 Note: Make sure the procedures in “Install the Driver & Utility” has been performed. 1. If you are using the Wireless

- 8 - Note for Windows 2000 users: During the installation, when the “Digital Signature Not Found” screen appears, click “Yes” to continue. Note for

- 9 - 3. Click Continue Anyway. 4. Click Finish to complete the installation. Verify Device Installation To verify that the device has been properl

the 802.11g Wireless PCI/CardBus PC Card is listed, it means that your device is properly installed and enabled. - 10 -

NETWORK CONNECTION Once the driver has been installed, you will need to make adjustments to your network settings. In Windows 98/ME 1. Go to Start

- 12 - If any components are missing, click on the Add button to install them. All of the protocols and clients required (listed above) are provided

- 13 - 6. Click the Access Control tab. Make sure that “Share-level access control” is selected. If connecting to a Netware server, share leve

- 14 - 7. When finished, restart your computer to activate the new device. 8. Once the computer has been rebooted, a Logon window will appear and

- 15 - 2. Make sure that you have all the following components installed. " Client for Microsoft Networks " NWLink NetBIOS " NWLink

REGULATORY STATEMENTS FCC Certification The United States Federal Communication Commission (FCC) and the Canadian Department of Communications have e

- 16 - 4. Select the network protocol you wish to add and click OK. This will return you to the Local Area Connections Properties window. 5. To a

CONFIGURATION After successful installation of the Wireless LAN Card’s driver, a Network Status icon will display in the task bar. You will be able t

Icon Link Status Connected to network Connecting Driver not loaded Disconnected from network Accessing the Configuration Utility The Configur

- 19 - Main Tab The Main tab displays the current status of the Wireless Network Adapter. Item Description External Configuration To Enable or Dis

Item Description - 20 - utility or other manufacturers’, such as Funk, Odyssey client utility. Disable ：Left this item unchecked to use the utili

- 21 - BSSID the BSSID of the Access Point to which the card is associated Connect Highlight one of the device from the list area and press the Con

- 22 - protection ensure mixed 802.11b and 802.11g operation. If there is no such kind of mechanism exists, the two kinds of standards may mutually i

- 23 - Fragment Threshold To fragment MSDU or MMPDU into small sizes of frames for increasing the reliability of frame (The maximum value of 4096 me

- 24 - Advanced Tab The Advanced tab displays the current status of the Wireless Network Adapter. Privacy Tab Use the Privacy Tab to configure your

- 25 - If you checked External Configuration in the Main tab(see page 10), functions in the following figure will be disabled.

Table of Contents INTRODUCTION... 1 WIRELESS NETWORK OPTIONS ...

- 26 - Privacy Mode Configure your NONE 、WEP or CCX settings： NONE：No security defined. WEP (Wired Equivalent Privacy) is a data security mechanism

- 27 - key setting from the radio button. Encryption：This setting is the configuration key used in accessing the wireless network via WEP encryption.

- 28 - name and password or the authentication process will fail. Statistics Tab The Statistics Tab displays the available statistic information inc

- 29 -

UNINSTALLATION In case you need to uninstall the Utility and driver, please refer to below steps. (As you uninstall the utility, the driver will be u

- 31 - - 31 -

ACCESSING THE CONFIGURATION UTILITY... 18 MAIN TAB...

INTRODUCTION The 802.11g Wireless LAN Card is a device that allows you connect your computer to a wireless local area network (LAN). A wireless LAN a

- 2 - You can also use one computer as an Internet Server to connect to a wired global network and share files and information with other computers v

- 3 - LED Indicators For Wireless CardBus Card Power Indicator: (Orange LED) This LED will illuminate when the driver is well-installed. Act Indicat

INSTALLATION Caution: Do not insert the Wireless LAN Card into your computer until the procedures in “Install the Driver & Utility” has been perf

5. When the Welcome screen appears, click Next to continue. 6. The Choose Destination Location screen will show you the default destination chosen